Extremis Vanguard Female Body Armor | Level IIIA+ | Made in the USA
Extremis Vanguard Female Body Armor | Level IIIA+ was designed in response to the specific requests of female end-users. Hundreds of measurements and fit tests were collected before settling on the four curve profiles. The result is a total of 18 unique size/curve combinations to ensure that there is a plate to fit every body type with superior comfort and protection compared to conventional soft and semi-structured female armor.
The Extremis Vanguard Female Body Armor system raises the bar of standard IIIA protection to stop the notorious FN 5.7 and nearly all stab/spike threats. The patented carbon fiber graphene composite construction allows for the production of nearly any shape and curvature without compromising weight efficiency.
Protection
- Level IIIA ballistic protection: stops the full suite of NIJ IIIA threats, and raises the bar to include protection from FN 5.7 x 28mm rounds and Level 3 spike/stab threats
- Available options include Multi Curve Front and Rear Plates, Female Curve Front Plates, Side Plates, Compression Shirt Carrier and Tactical Carrier
NIJ 0101.06 | Compliance | Level IIIA+ |
Thickness | 0.3″ |
Threat | .44 Magnum .357 Magnum .40 S&W 9mm |
Special Threat | FN 5.7 x 28mm Spike Level 3 |
Options | Multicurve Front and Rear Plates Female Curve Front Plates Side Plates Compression Shirt Carrier Tactical Carrier |
Features
- Patented polymer infusion system
- 18 size/curvature combinations to cater to all female body shapes
- Covert & overt options for plate carriers, specifically designed for female curve plates
- Reduces deformation to the thoracic cavity upon impact
- Made in the USA from Berry Compliant materials
Weight and Comfort
- Lightweight design: Achieves its ballistic rating at a weight of 1.8 lbs (size SC3/medium)) making it some of the lightest ballistic armor in its class
- Minimal thickness: 0.3″
Plate Sizing Chart
To determine plate width, measure the distance from papilla mammae to papilla mammae. For height, measure from the top of the sternum to the navel and subtract three inches. Based on these measurements, find the nearest corresponding size. If between sizes, we recommend sizing up to prioritize coverage or down to prioritize comfort.
For curvature, the S-Curve is equivalent to standard multi-curve SAPI profiles. M-Curve is normally used for cup sizes A, B, and up to 35C. L-Curve is normally used for cup sizes 36C, D, and E. X-Curve will accommodate anything larger than E.
Sizing kits are available for companies/agencies that may need assistance with sizing many users at once.
Curvature | ||||
8.25″ x 11.25″ | 9″ x 12″ | 9.75″ x 12.75″ | 10.5″ x 13.5″ | 11″ x 14″ |
SC1 | SC2 | SC3 | SC4 | SC5 |
MC1 | MC2 | MC3 | MC4 | MC5 |
LC1 | LC2 | LC3 | LC4 | Â |
XC1 | XC2 | XC3 | XC4 | Â |
Level IIIA+ | SAPI Cut | |||
Size | Dimensions | Thickness | Weight (lbs) |
SC1 | 8.25″ x 11.25″ | 0.3″ | 1.42 |
SC2 | 9″ x 12″ | 0.3″ | 1.61 |
SC3 | 9.75″ x 12.75″ | 0.3″ | 1.86 |
SC4 | 10.5″ x 13.5″ | 0.3″ | 2.12 |
SC5 | 11″ x 14″ | 0.3″ | 2.35 |
Configuration Types
- Single plate
- Standard Set (Pair of plates – front & rear)
- Full Set (Front, rear & Side plates)
** Please note that FULL SET configurations come with either 6 x 6 (XS/S/M) or 6 x 8 (L/XL) side plates **
Summary
For detailed specifications and ballistics testing information, please refer to the manufacturer’s product page [https://www.extremissystems.com/]. However, right here you can find the key features of the Extremis Vanguard Female Body Armor Level IIIA ballistic protection, lightweight design (1.8 lbs for size SC3/medium), made in the USA with Berry-compliant materials, and ideal for law enforcement, military, and civilian security applications.
Reviews
There are no reviews yet.